Automatic tension control with microprocessor, high-speed A/D, anti-jamming, PID. Used in printing, packaging, papermaking, textiles, cable. Fully and semi-automatic models.






Tension Sensor (detector): | ||||||
Model |
50N |
150N |
300N |
500N |
1000N |
2000N |
Rated Load |
50N |
150N |
300N |
500N |
1000N |
2000N |
Working load direction |
Compression and tension in both directions |
|||||
Installation |
Ground installation Hang up installation Suspended installation |
|||||
Exploitation conditions |
-5~+40°C Vibration of the following 2m/s2 |
|||||
Weight |
1.8KG |
|||||



|
Auto Tension Controller Parameter:
|
|
|
Work mains input
|
AC220V 100W
|
|
Work power source output
|
DC10V,the tension examination power source
|
|
Simulation input signal
|
Two group tension detector signal input
|
|
Simulation output signal
|
Control output DC0-10V to use in serving controls and so on amplifier.
Control output DC0-24V to use in controlling the DC24Velectric current less than 4A, following magnetic powder (electromagnetism) digital quantity. |
|
Input signal
|
Each numeral quantities and so on coupling brake all to use the Photoelectrictiy isolation electric circuit to input, all digital
quantity input only DIO DIA DIB. |
|
Use ambient temperature
|
-10~40degree
|
|
Use environment humidity
|
35~85% RH( No condensation)
|
|
Use environment
|
Non-corrosiveness, not flammable gas,non-conductive dust, dust few
|
|
Earths
|
D kind of earth (It is prohibition of the strong electricity electric wire earths together)
|





1. When can I get the quotation?
We usually quoted within 24 hours after receiving your inquiry. If you are very urgent to get the price, please call us or tell us in your email, so that we can regard your inquiry priority.
2. How should I place an order?
Please let us know the model number based on our specs for powder clutch, powder brake, air clutch, air brake, electromagnetic clutch, electromagnetic brake and safety chucks, other transmission parts. For air shafts, air adapter please show us your drawing, or let us know your request, and then we will provide you drawing for confirmation.
3. What’s your MOQ basis?
Normally, we don’t have MOQ request, except the customized mini clutches/brakes.
4. What about the lead time for production?
Honestly, it depends on the order quantity and the type of our products. For powder clutch, powder brake, tension controller, which is about 3-5 days. For safety chucks, air shafts which need about 15-30 days.
5. What is the term of shipment?
We can arrange with EXW, FOB, CIF…etc. You can choose the most convenient one or cost-effective way.